Home

Select a country or region to view the content for your location and shop online.
Skip to content
Choose store language
Home

Hybrid Speaker M 420 F

Highlights

Gallery image 1 from 1 Hybrid Speaker M 420 F

Key advantages at a glance

  • Integrierter aktiver Subwoofer
  • Für alle AV-Receiver geeignet
  • Empfohlen für Räume bis 50 qm
  • Hybrid-Lautsprecher des Theater 4 Hybrid

Specifications

M 420 F vorne Buche

Hybrid Speaker M 420 F

The M 420 F column speaker is much more than a conventional column speaker. The special hybrid construction of this speaker allows it to simultaneously function as a passive stereo speaker and an active subwoofer.

Two 130 mm carbon fibre woofers and a 25 mm neodymium tweeter have been implemented in each speaker using the tried-and-tested D’Appollito configuration. Flanked by a 250 mm side-firing subwoofer, the M 420 F has a full-bodied response with incredible bass – and all in an ultra thin design!

The remarkable bass performance of this speaker is made possible by a separate 175 W amplifier which is solely responsible for the subwoofer channel. The tweeter/mid-range driver is located above, and is passively decoupled to handle frequencies from 90 Hz upwards. This driver can easily be seen from the front and is acoustically isolated within the column.

The universal design of the integrated active subwoofer allows it to be connected to the ‘Sub Out’ of your AV receiver or the speaker terminals of your stereo amplifier. In any case, this relieves your amplifier/receiver from bass duties and frees it up to concentrate more on the other frequency ranges.

With a pair of M 420 F speakers, you will dramatically improve the quality of the bass response in your stereo system. When used in a surround sound system, these two column speakers essentially add two subwoofers to your system.

A three-stage volume selector switch allows you to select how much bass is split between the subwoofer and tweeter/mid-range drivers and thus match the system to your listening environment.

This active/passive design delivers bass all the way down to 35 Hz and can generate sound pressure levels as high as 103 dB/m!

  • Description Item
    Width 16.5 cm
    Height 110 cm
    Depth 36 cm
    Weight 23.6 kg
  • Description Item
    Standby-Function Yes
    Standby-Power consumption 2 W
    Level control Analogue
    Power output capacity sinus (RMS) Bass 175 W
  • Description Item
    Lowest frequency (-3 dB) 25 Hz
    Suitable for AV receiver Yes
    Banana plug compatible Yes
    Maximum cable diameter 4 mm
    Removable front cover Yes
    Magnetic shielding Yes
    Tweeter (number per enclosure) 1
    Tweeter (diameter) 25 mm
    Tweeter (material) Fabric
    Bass/Midrange driver (number per enclosure) 2
    Bass/Midrange driver (diameter) 130 mm
    Bass/Midrange driver (material) Fibreglas
    Woofer (number per enclosure) 1
    Woofer (diameter) 250 mm
    Continuous power handling (IEC - Long Term) 130 W
    Frequency range 34 - 22000 Hz
    Peak power capacity (IEC - Short Term) 180 W
    Maximum sound pressure level 103 dB/1m
    Impedance 4 - 8 Ohm
    Crossover frequency to Woofer (recommended) 90 Hz
    Acoustic principle 2-way-system
    Enclosure type Closed
  • Description Item
    Terminal clamps Screw terminals
    Minimum amplifier output power recommended 20 W

Reviews

customer.review.ratings.filter.no.results

Included components

Hybrid Speaker M 420 F