Coaxial-Cable 1.5m - C7515D
Digital coaxial cable 1.5 m / 3.0 m
Check out the next generation now.
Description | Item |
---|---|
Cross-section | 1 mm² |
Cable length | 30 m |
The active Subwoofer US 2108/6 SW comes in 24 liter housing and weighs 14 kg is an indispensable part of the set for optimal cinema surround sound in your home.
The compact size means the subwoofer takes up little space. Despite its slim shape the subwoofer still incorporates the powerful and large 200 mm woofer, allowing the US 2108/6 SW to perform to a much higher standard than others in the same price range. Thanks to an amplifier with 100 watts of power, the US 2108/6 SW bass that goes down to an incredible 45-Hz. The internal limiter protects the subwoofer from overload and distortion.
At the back there is a phase switch and sockets for direct connection of the surround speakers. And on the back you can easily connect the Decoder or the Control Station 5 mark 2.
Optically, the US 2108/6 SW is timeless and perfect for any living room. With its sleek and discreet shapes with modern gloss and rounded corners, this subwoofer fits into any living room. The bass reflex port at the bottom and the special notch on the back of the housing ensure seamless positioning against most walls. Four resonators ensure stable positioning and decoupling from the floor.
The US 2108/6 SW is only sold as part of a Teufel set and cannot be ordered separately.
Description | Item |
---|---|
Width | 28 cm |
Height | 50 cm |
Depth | 28 cm |
Weight | 13.95 kg |
Description | Item |
---|---|
Power supply voltage | 230 V |
Automatic on/off | Yes |
Maximum power consumption | 450 W |
Mains cable - IEC connector (non-heating device) | Yes |
Safety class | 2 |
Fuse | Yes |
Storage for settings when disconnected | Yes |
Standby-Function | Yes |
Standby-Power consumption | 0.5 W |
Bass boost/EQ | Yes |
Input gain adjustment | Yes |
Level control | Yes |
Power output capacity sinus (RMS) Bass | 100 W |
Power output capacity impulse (peak) Satellite | 25 W |
Power output capacity impulse (peak) Bass | 125 W |
Amplifier configuration | 5.1 |
Amplifier technology | Class AB + Class D |
Amplifier channels | 6 |
Power output capacity sinus (RMS) Satellite | 20 W |
Description | Item |
---|---|
Lowest frequency (-3 dB) | 40 Hz |
Maximum cable diameter | 4 mm |
Equalization port (position) | Bottom |
Equalization port | 1 |
Down-firing | Yes |
Cabinet material | MDF |
Cabinet surface | High gloss (front), foil (corpus) |
Magnetic shielding | Yes |
Net internal volume | 24 L |
Integrated stand | Yes |
Woofer (number per enclosure) | 1 |
Woofer (diameter) | 200 mm |
Woofer (material) | cellulose |
Continuous power handling (IEC - Long Term) | 100 W |
Sensitivity (2.83 V / 1 m) | 87 dB |
Frequency range | 40 - 200 Hz |
Peak power capacity (IEC - Short Term) | 250 W |
Maximum sound pressure level | 112 dB/1m |
Impedance | 4 Ohm |
Acoustic principle | 1-way-system |
Enclosure type | Bass reflex |
Description | Item |
---|---|
Terminal clamps | Push terminals |
High level speaker outputs | 5 |
RCA input 5.1 | 1 |
The center speaker in its landscape format is the equal to the column speakers, having identical kit inside. The two midrange drivers and tweeter are set back in their glass housing as well. This is how we keep the design of this system fresh and looking bright while providing fantastic speech intelligibility.
The CL 250 C is designed for two separate setup possibilities: either you set it on the shelf or you mount it directly to the wall by the integrated wall mount.
Description | Item |
---|---|
Width | 50 cm |
Height | 15 cm |
Depth | 7.2 cm |
Weight | 2 kg |
Description | Item |
---|---|
Terminal clamps | Screw terminals |
Minimum amplifier output power recommended | 20 W |
Description | Item |
---|---|
Suitable for AV receiver | Yes |
Maximum cable diameter | 2.5 mm |
Removable front cover | Yes |
Cabinet material | Plastic + glass |
Cabinet surface | Lacquer, matte + glass |
Magnetic shielding | Yes |
Keyhole plate mounted | Yes |
Wall mounting brackets | Yes |
Tweeter (number per enclosure) | 1 |
Tweeter (diameter) | 19 mm |
Tweeter (material) | Textile |
Bass/Midrange driver (number per enclosure) | 1 |
Bass/Midrange driver (diameter) | 70 mm |
Bass/Midrange driver (material) | Cellulose |
Continuous power handling (IEC - Long Term) | 60 W |
Sensitivity (2.83 V / 1 m) | 85 dB |
Frequency range | 120 - 20000 Hz |
Peak power capacity (IEC - Short Term) | 100 W |
Maximum sound pressure level | 97 dB/1m |
Impedance | 4 - 8 Ohm |
Crossover frequency to Woofer (recommended) | 150 Hz |
Acoustic principle | 2-way-system |
Enclosure type | Closed |
Crossover frequency internal switch | 2400 Hz |
The CL 250 FCR rear speaker is optimised via klippel and its 80 mm deep-midrange driver and the 19 mm fabric tweeter with its Neodym magnet. In construction and development, this rear speaker is identical to the centre speaker. You can mount this speaker either on stands or place on the wall, thanks to the integrated wall mount.
Description | Item |
---|---|
Width | 15 cm |
Height | 50 cm |
Depth | 7.2 cm |
Weight | 2 kg |
Description | Item |
---|---|
Terminal clamps | Screw terminals |
Minimum amplifier output power recommended | 20 W |
Description | Item |
---|---|
Suitable for AV receiver | Yes |
Maximum cable diameter | 2.5 mm |
Removable front cover | Yes |
Cabinet material | Plastic + glass |
Cabinet surface | Lacquer, matte + glass |
Magnetic shielding | Yes |
Net internal volume | 2.7 L |
Keyhole plate mounted | Yes |
Wall mounting brackets | Yes |
Tweeter (number per enclosure) | 1 |
Tweeter (diameter) | 19 mm |
Tweeter (material) | Textile |
Bass/Midrange driver (number per enclosure) | 2 |
Bass/Midrange driver (diameter) | 70 mm |
Bass/Midrange driver (material) | Cellulose |
Continuous power handling (IEC - Long Term) | 60 W |
Sensitivity (2.83 V / 1 m) | 85 dB |
Frequency range | 120 - 20000 Hz |
Peak power capacity (IEC - Short Term) | 100 W |
Maximum sound pressure level | 97 dB/1m |
Impedance | 4 - 8 Ohm |
Crossover frequency to Woofer (recommended) | 150 Hz |
Acoustic principle | 2-way-system |
Enclosure type | Closed |
Crossover frequency internal switch | 2400 Hz |
This ultra compact control device serves as a preamp for a 5.1-powered subwoofer. The Decoder Station Mk2 offers four digital (optical and 2x 2 x coaxial) inputs plus four stereo analog inputs (1 x 5.1, 1 x stereo). These are located on the back of the device and are suitable for the connection of many different devices. The integrated decoder for DTS, Dolby Digital, Dolby Pro Logic ensures perfect surround sound for many playback devices.
With the extra Lip Sync option you ensure that video and audio are played simultaneously. The Decoder Station is compatible with many different types of speakers in the frequency range of 80-250 Hz. The included remote control gives you access to all the devices that you have connected the decoder Station Mk2.
Description | Item |
---|---|
Width | 23.5 cm |
Height | 5.4 cm |
Depth | 15 cm |
Weight | 1.01 kg |
Description | Item |
---|---|
Cinch input stereo | 3 |
Digital inputs coaxial | 2 |
Digital inputs optical | 1 |
RCA output 5.1 | 1 |
RCA input 5.1 | 1 |
Description | Item |
---|---|
Dolby Digital | Yes |
Dolby Pro Logic II | Yes |
DTS Digital Surround | Yes |
DTS NEO:6 | Yes |
Dolby Pro Logic | Yes |
Description | Item |
---|---|
Integrated DSP | Yes |
Power supply voltage | 100 - 230 V |
Automatic on/off | Yes |
Storage for settings when disconnected | Yes |
Standby-Function | Yes |
Standby-Power consumption | 0.5 W |
Description | Item |
---|---|
Remote control | Infrared |
All required accessories are included in the delivery.